Microplex M204 Especificaciones descargar pdf (Pagina 82)

74 CONFIGURING THE M204 FOR WINDOWS: Host Configuration

Windows for Workgroups (WfW)

NetBIOS Using Print Manager Method

In order to use this method, you must ﬁrst conﬁgure the M204 with a Microsoft Net-

works Workgroup name. This can be done by telneting to the M204, starting an npsh

session with the unit, and issuing the following command:

store pserver smb workgrp

workgroupname

where workgroupname is the name of the Microsoft Networks Workgroup that you

want the M204 to be included in (e.g. Engineering).

You must reset the M204 for this command to take affect.

1 Ensure that the network connection is functioning properly between the Windows

workstation and the M204. Try to ping or telnet to the unit.

2 Open Print Manager.

3 Select Connect Network Printer from the Printer menu or click on the appro-

priate toolbar item.

4 A list of known workgroups will appear. Double click on the workgroup name

that you previously conﬁgured the M204 under (e.g. Engineering).

5 Double click on the M204 once the list of registered devices in this workgroup

appears.

6 A list of destinations (e.g. d1prn1) with NetBIOS service enabled will appear.

These are read directly from the M204. Select one of them.

7 Click OK.

This printer is now available for printing using NetBIOS over TCP/IP.

Windows 95

NetBIOS Using Print Manager Method

This setup assumes that you have already created a local printer using the Add a New

Printer icon in the Settings:Printer folder. You can use any port here such as LPT1

or LPT2 when creating this printer.

In order to use this method, you must ﬁrst conﬁgure the M204 with a Microsoft Net-

Note

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 203 204

Sin comentarios

Microplex M204 Especificaciones Pagina 82