Microplex M204 Especificaciones descargar pdf (Pagina 132)

124 USING THE M204’S ADDITIONAL OPTIONS: TCP/IP Options

Novell and TCP/IP are the only protocols that offer this conﬁguration. The M204 pro-

vides simultaneous support of multiple Novell frame types. Please see store pserver

on page 107 and store tcpip on page 110 to ﬁnd out which frame types are offered in

each environment.

TCP/IP Options

Restoring To Factory Defaults

Once and a while, it is necessary to set the M204’s network parameters back to factory

defaults whether it is because you are moving the Print Server, you are changing your

addressing schemes, or you just want to start from scratch. These network parameters

include: IP address, netmask, and routing table entries.

Two methods are available for doing this:

1 physically moving jumpers inside the Print Server,

2 issuing a command on the M204 and rebooting.

Either way will produce an M204 that has all of the network settings it came with

originally. Each method is described next.

Through Jumpers

For normal operation, the unit has its S3 strap on pins 1 and 2 for EEPROM Enable.

Moving the strap from this position to pins 3 and 4, or DEFAULT IP, will override

your network settings and put the unit to factory defaults. Please see M204 Jumper

Settings on page 125 for the jumper locations.

Caution

The inside of the M204 is sensitive to static electricity so be sure to ground yourself to

the chassis before touching any internal components.

To manually set the unit to defaults:

1 Open the cover.

2 Move the jumper strap from pins 1 and 2 to 3 and 4.

1 2 ... 127 128 129 130 131 132 133 134 135 136 137 ... 203 204

Sin comentarios

Microplex M204 Especificaciones Pagina 132