Microplex M204 Especificaciones descargar pdf (Pagina 25)

INSTALLING THE M204 ON THE NETWORK: Connecting Peripherals 17

als on page 17 for details on each of the M204’s I/O ports.

3 Unpack and plug in the power supply. The connector plugs into the back of the

M204. Watch the lights on the front panel of the Print Server as they cycle through

the power-on self test. When the self test is complete, the POWER light is on and

STAT is ﬂashing.

Figure 2: M204 Diagram

Connecting Peripherals

A maximum of four devices can be attached to an M204 at the same time; two on the

parallel ports and two on the serial ports.

Parallel Port Connections (PRN1, PRN2)

Two 25-pin female DB-25S connectors with an IBM PC compatible pinout are pro-

vided on the rear panel for connection to a printer using a parallel port. These ports

can be conﬁgured with various parameters depending on the attached printer. These

parameters include:

• ackmode for printers (usually non-laser printers) that use the

ACK signal for the

trigger of next data transfer rather than the BUSY signal,

M204 Front View

M204 Rear View

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 203 204

Sin comentarios

Microplex M204 Especificaciones Pagina 25