Microplex M204 Manual descargar pdf (Pagina 7)

05/13/97 7

M204 v5.7.2 Release Notes (Con’t)

4 Once extracted to a directory, ﬁnd the “Setup” ﬁle and double click on

this to load the InstallShield Wizard.

5 Answer the prompts throughout the wizard and select “Yes” to restart

your computer at the end.

6 Once your computer is rebooted, open the Settings:Printer folder to

view your existing printers.

Note: MPS will only work with an existing printer.

Therefore, if you don’t have an existing printer that

you can alter, create one now using any port set-

tings you’d like. These will be changed in the fol-

lowing steps anyways.

7 Select the printer that you want to use with MPS and click on the right

mouse button to bring up a sub-menu.

8 Select “Properties” from this menu to display the current settings for

this printer.

9 Click on the “Details” tab to display the printer’s port settings.

10 Click on the ADD PORT button.

11 At the “Add Port” dialogue box that displays, click on the radio but-

ton labeled “Other”.

12 Click on “Microplex TCP/IP Printer Port” from within this “Other”

list.

13 At the next dialogue box that displays, ﬁll in the host name or IP

address of the M205/M206 in the ﬁrst ﬁeld.

14 Fill in a valid TCP port number on the M205/M206 in the second

ﬁeld. The choices are 4000 for COM1, 4200 for COM2, 4400 for

PRN1, and 4600 for PRN2 depending upon which port your printer is

attached to.

15 Click OK when done to return to the “Details” window. You should

now see something about “MPS Port” within the “Print to following

port:” ﬁeld.

16 Click OK to close this printer’s properties window.

You now have a new network printer which relies on MPS to print

remotely to a printer off of the M204.

1 2 3 4 5 6 7 8 9 10

Sin comentarios

Microplex M204 Manual Pagina 7